Printing troubleshooting guide
To download the FDM manual, click here.
This issue is due to humidity.
For more information about this and how to solve it, Read this.
In small prints, you need to use some trick of your preference in order to not overheat the print.
The most common technique is to repeat the model on the print bed in order to spare the layer time.
Or you can create a sacrifice tower next to it and using a modifier for slowing down that tower you will achieve the objective: to let the model have enough time to cool down between layers (20 seconds even 25 is the minimum recommended layer time, the slicer takes this into account but up to certain limits.
Brims help to fight warping. in most cases, it is not necessary but geometry is something that can be super changing and there is no way to predict how the material will behave. The same model printed with 3 perimeters might warp if you later change that number to 5 for example. So the software can not predict how the material warping.
If you observe that the first layer is too high or too low, follow this instruction.
Smart3D printers are extremely accurate. If the STL is not of good quality, the machine will detect it and the curves of the object may look like this, as this printer is capable of printing these extremely small details
To fix this, go to Smart3D Slicer >> Printer settings >> slicing. Here, modify the cuttoff parameter into 5 and Precision into 0.02, this will smooth the curves.
It is necessary to use S3D filaments and printing profiles, otherwise, the good quality of the objects cannot be guaranteed.
Do not use filaments or any slicer other than the one from S3D.
Nylon 6/66/12 is a transparent material. When printed you will get a material that is very clear.
The white color on a print shows the material is wet.
If this nylon spool has been exposed to ambient air for two days or more, the print will surely be affected by moisture.
Humidity causes the material to be deposited on the side of the spout, that material gradually "slips" from it. As it does so, the Nylon is burning, and sooner or later, a drop of burned material will fall on the impression.
To know more about this and how to solve it, click here.